Solis RSS

If your Solis inverter shows an alarm (or your app reports a fault), the fastest way to get help is to capture the exact alarm details and supporting evidence before you contact your installer or Solis support. This guide keeps you within a read-only boundary: you will only navigate display/app menus and collect information. You will not change settings, clear protections, or apply steps meant for a different Solis family. Safety boundary (please read first) Do not open the inverter, remove covers, or touch any cabling or terminals. Do not change settings or configuration while looking for alarms (avoid any...

Why SolisCloud Readings Look Delayed or Show Brief Import and Export Spikes If your SolisCloud graphs seem to “lag” behind what you expect, or you notice short periods where the app shows both import and export, it’s tempting to assume something has changed in your PV system. In many cases, what you are seeing is a monitoring and data transmission effect rather than confirmed system behaviour. This guide helps you understand snapshot timing, collect the right evidence, and decide when to escalate—without touching metering/CT wiring or inverter settings. Safety boundary: monitoring interpretation only Do not open the inverter, datalogger, meter,...

Solis is not one interchangeable inverter range. Before comparing individual models, decide whether the project needs a string or hybrid inverter, confirm the property's supply phase, identify the required nominal AC output and, for a storage system, establish the correct battery voltage class. Scope of this guide This is a family-level buying guide, not an electrical design or a battery compatibility table. The exact inverter model, Irish connection route, battery pairing and backup arrangement must still be checked for the individual project. Product titles are useful labels, but the model or SKU on the product record and manufacturer documentation should...

A blank screen does not always mean failure. On the S6-EH1P(3-8)K-L-PLUS family, the screen sleeps after a few idle minutes and should return after a front-panel button press. Solis defines a genuinely non-starting inverter as a blank display, no indicator lights and no generation. Scope and safety The safe observations in this guide can help any homeowner describe a blank Solis inverter. The detailed screen and indicator meanings apply only to the S6-EH1P(3-8)K-L-PLUS European family, including the Solarboss S6-EH1P5K-L-PLUS. RHI, S5 and other S6 families can use different displays, menus and power arrangements. Do not apply this S6 procedure to...

The three labelled lights describe separate parts of the monitoring path. PWR is power, COM is logger-to-inverter communication, and NET is the connection to the Solis server. Reading them separately avoids assuming an inverter fault. Scope and safety This guide is for the S2-WL-ST, S3-WiFi-ST, S4-WiFi-ST and S5-WiFi-ST models covered by Solis's current support article, including USB and four-pin versions. Indicator layouts and behaviour on older DLS-W, GPRS, LAN-only or other logger families may differ. Observe the label and lights only. Do not remove, rotate or reseat an installed logger, open the inverter or touch wiring. Solis says an installed...