Solis RSS

Brand Guide, gf-date:2026-07-22, gf-slot:17, gf:solis-blank-wont-turn-on, Guide Factory, Solis -

My Solis Inverter Is Blank or Won't Turn On: Safe Checks Before Calling Your Installer

My Solis Inverter Is Blank or Won't Turn On: Safe Checks Before Calling Your Installer

A blank screen does not always mean failure. On the S6-EH1P(3-8)K-L-PLUS family, the screen sleeps after a few idle minutes and should return after a front-panel button press. Solis defines a genuinely non-starting inverter as a blank display, no indicator lights and no generation. Scope and safety The safe observations in this guide can help any homeowner describe a blank Solis inverter. The detailed screen and indicator meanings apply only to the S6-EH1P(3-8)K-L-PLUS European family, including the Solarboss S6-EH1P5K-L-PLUS. RHI, S5 and other S6 families can use different displays, menus and power arrangements. Do not apply this S6 procedure to...

Read more

Brand Guide, gf-date:2026-07-22, gf-slot:08, gf:solis-datalogger-lights, Guide Factory, Solis -

What the PWR, COM and NET Lights Mean on a Solis Datalogger

What the PWR, COM and NET Lights Mean on a Solis Datalogger

The three labelled lights describe separate parts of the monitoring path. PWR is power, COM is logger-to-inverter communication, and NET is the connection to the Solis server. Reading them separately avoids assuming an inverter fault. Scope and safety This guide is for the S2-WL-ST, S3-WiFi-ST, S4-WiFi-ST and S5-WiFi-ST models covered by Solis's current support article, including USB and four-pin versions. Indicator layouts and behaviour on older DLS-W, GPRS, LAN-only or other logger families may differ. Observe the label and lights only. Do not remove, rotate or reseat an installed logger, open the inverter or touch wiring. Solis says an installed...

Read more

Brand Guide, gf-date:2026-07-21, gf-slot:11, gf:solis-reconnect-wifi, Guide Factory, Solis -

How to Reconnect a Solis Wi-Fi Dongle After Changing Router or Password

How to Reconnect a Solis Wi-Fi Dongle After Changing Router or Password

If SolisCloud went offline just after you changed broadband provider, replaced the router, renamed the home Wi-Fi network or changed its password, the inverter may be perfectly well while the datalogger is still trying to reach the old network. Reconfigure the datalogger with the new Wi-Fi details, then confirm its status in SolisCloud. Scope and safety This guide covers the Solis S2-WL-ST, S3-WiFi-ST, S4-WiFi-ST and S5-WiFi-ST dataloggers named in Solis's current support guidance. It does not cover the older DLS-W or every Solis communications accessory. Identify the model before starting. These are phone, router and monitoring steps only: do not...

Read more

Tags