Description
Overview
Renusol Console + buckets for flat roof mounting. Complete kit with all the fixing bars and clips needed to mount one standard 60-cell solar panel.
Description
The Renusol ConSole buckets area ballasted solution for installing PV modules on flat roofs or the ground.
The ConSole+ provides an angle of 15 degrees and can be fitted to flat roofs with a pitch of up to 5 degrees.
Renusol also offer the 460196 Elongation Rails XL to accommodate the larger PV Panels of today's market.
The ConSole is weighed down with ballast. Any material can be used: gravel, paving slabs, bricks, rocks etc. The amount of ballast depends on the height and location of the building.
Before installing please read the Renusol Notes and use the Renusol PV Configurator to design your array and specify the ballast.
Max 80x to a pallet. 8Kg each.
Features
Mounting components are included for framed PV-modules. The modules attach to the mounts using the mounting holes on the back of the module. Please check the measurements below against your panel specification
| Max module length | 1550-2150 mm |
|---|---|
| Holes gap - width | 895-1014 mm |
| Holes gap - length | 690-1180 mm |
Pack includes
- 1 x ConSole+
- 2 x ConSole U-Profile 1035 mm
- 4 x Hexag screw DIN933-M6x20 A2-70
- 4 x Washer DIN9021-6,4-A2
- 4 x Self-locking hexag nut DIN985-M6-A2
- 4 x ConSole Clip
- 4 x Hexag screw DIN7504-ST5,5x25-A2-SW8
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.
- Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device