Solar Inverter RSS

If your Solis battery is not charging or discharging when you think it should, the cause is often a visible setting (mode, time schedule, reserve) or a system limitation that changes what is achievable in practice. This guide keeps you within a safe homeowner boundary: observe what the system is doing, record the key settings and messages, and escalate with good evidence. Do not change protection settings, grid code settings, firmware, battery parameters, or any battery communications wiring (CAN/DIP/RS485). Before you start: confirm what you have (and stop if unsure) This guide is written for the Solis S6-EH1P(3–8)K-L-PLUS European range...

Solis 1015 NO-GRID or AC Breaker Tripping: What It Means and What to Do Next This guide helps you understand the Solis alarm 1015 NO-GRID / AC MCB tripping at a high level, record useful evidence, and recognise when a qualified installer/electrician or Solis support is required. It stays within a strict homeowner safety boundary: observation only, normal app/router checks, evidence gathering, and escalation. What “1015 NO-GRID / AC MCB tripping” indicates (high level) Solis describes alarm 1015 as “NO-GRID / AC MCB tripping” in its support resources. In practical terms, this label suggests the inverter is detecting a grid/AC...

If your Solis inverter shows an alarm (or your app reports a fault), the fastest way to get help is to capture the exact alarm details and supporting evidence before you contact your installer or Solis support. This guide keeps you within a read-only boundary: you will only navigate display/app menus and collect information. You will not change settings, clear protections, or apply steps meant for a different Solis family. Safety boundary (please read first) Do not open the inverter, remove covers, or touch any cabling or terminals. Do not change settings or configuration while looking for alarms (avoid any...

Why SolisCloud Readings Look Delayed or Show Brief Import and Export Spikes If your SolisCloud graphs seem to “lag” behind what you expect, or you notice short periods where the app shows both import and export, it’s tempting to assume something has changed in your PV system. In many cases, what you are seeing is a monitoring and data transmission effect rather than confirmed system behaviour. This guide helps you understand snapshot timing, collect the right evidence, and decide when to escalate—without touching metering/CT wiring or inverter settings. Safety boundary: monitoring interpretation only Do not open the inverter, datalogger, meter,...

Solis is not one interchangeable inverter range. Before comparing individual models, decide whether the project needs a string or hybrid inverter, confirm the property's supply phase, identify the required nominal AC output and, for a storage system, establish the correct battery voltage class. Scope of this guide This is a family-level buying guide, not an electrical design or a battery compatibility table. The exact inverter model, Irish connection route, battery pairing and backup arrangement must still be checked for the individual project. Product titles are useful labels, but the model or SKU on the product record and manufacturer documentation should...