Wi-Fi & app monitoring
Check your battery’s charge level and operating status from your phone. Wi-Fi connection and app setup are required.
16.08kWh · LiFePO4
Easyway UNIV-16kWh(WP)
Easyway UNIV-16kWh(WP)EASYWAY HOME ENERGY STORAGE
Easyway
16.08kWh battery.
UNIV-16kWh(WP) · LiFePO4 home storage
High-capacity storage for your home energy system, with an IP65 enclosure, integrated heating plates and built-in aerosol fire suppression.
10-yearwarranty
8,000warranted cycles
Subject to the written warranty terms and operating conditions. View warranty guidance ↓
ONE-TIME PREORDER OFFER
How this offer works
One-time promotion on the standalone Easyway UNIV-16kWh(WP) battery.
- Regular price: €1,850 + VAT.
- Promotional price: €1,650 + VAT — save €200 + VAT (€246 including VAT) per battery.
- No code needed: the offer is applied automatically in your cart.
- Ends at 00:00 Irish time on 10 November 2026. The €1,850 + VAT price applies from that moment.
- Standalone battery only; NightSaver packs are excluded.
Preorder stock is expected on 10 November. Delivery and installation are additional.
Regular price€2,275.50€1,850.00 incl. VAT ex. VAT
SAVE €200 + VAT€2,029.50€1,650.00 incl. VAT ex. VAT
Limited preorder allocation at this priceFirst come, first served.
The clock is ticking
--Days
--Hours
--Minutes
--Seconds
Price returns to €1,850 + VAT on 10 November 2026.
Offer ends at 00:00 Irish time on 10 November.
Free warehouse collectionChoose collection at checkout, by arrangement after stock arrives.
Battery onlyInverter, electrical installation and commissioning are additional.
Pre-order · stock expected 10 November 2026
Full payment at checkout. Dispatch or collection follows arrival; the arrival date is an estimate.
IEC 62619:2022SGS CB battery safetyEMC verifiedSGS EMC verificationCE / RoHSManufacturer EU declarationUN 38.3Transport tested
Will it work with my inverter?
Dust & water-jet protection
A dust-tight enclosure that resists water jets helps protect the battery from dirt and splashes. Your installer must follow the manual’s location requirements.
Integrated heating: −20°C to +55°C
Heating plates prewarm the cells before charging in freezing conditions. Operation down to −20°C requires compatible inverter communication and charging power.
Built-in fire suppression
An integrated aerosol fire-suppression unit is included. Correct protection and professional installation remain essential.
MANUFACTURER-LISTED COMPATIBILITY
Works with leading inverter brands.
The brands shown are included in Easyway’s UNIV-16kWh(WP) compatibility matrix. Confirm your exact model, firmware and settings with SolarBoss before purchase. Check your inverter ↓
CONNECT WITH CONFIDENCE
Check your inverter.
Get the right match.
The battery communicates over CAN or RS485. Compatibility depends on your exact inverter model, firmware, battery protocol and installation setup.
Not sure? Triple-check with SolarBoss before you purchase. Send us your inverter model and a photo of its label so we can check the combination.
Download the manufacturer’s full inverter compatibility list (PDF) ↗
Solis: manufacturer-listedChoose your inverter ↓
DOCUMENTED PRODUCT EVIDENCE
Standards & supporting documents
Check the exact model, document scope and installation requirements with your installer.
IEC 62619:2022
SGS IECEE CB certificate BE-57990, including UNIV-16kWh(WP).
View document ↗EMC documentation
SGS SHCR260400078201AEC: EN IEC 61000-6-1:2019 and EN IEC 61000-6-3:2021.
View document ↗EU Declaration of Conformity
Manufacturer declaration covering EMC and RoHS. Check its stated model and scope.
View document ↗UN 38.3
Lithium-battery transport test report 1811C60156312701. This is transport evidence, not inverter compatibility approval.
View document ↗Safety data sheet
SDS / MSDS 1811C60156312704 provides handling and safety information. A safety data sheet is not a product certificate.
View document ↗THE DETAILS THAT MATTER
Built for your
energy setup.
Compact floor-standing storage with LiFePO4 chemistry and CAN / RS485 communication. Plan access, handling and clearances with your installer.
Read the manufacturer’s manual ↗Battery specifications
- Nominal / usable energy
- 16.08 / 15.11kWh
- Chemistry / nominal voltage
- LiFePO4 / 51.2V
- Battery capacity
- 314Ah
- Operating voltage
- 44.8–57.6V
- Recommended charge / discharge current
- 157A / 157A
- Maximum charge current
- 157A
- Maximum discharge current
- 200A (manufacturer rating)*
- Charging with integrated heating
- −20°C to +55°C; cells prewarm before charging below 0°C
- Charging without heating
- 0°C to +55°C
- Discharge temperature
- −20°C to +55°C
- Communications
- CAN / RS485
- Parallel expansion
- Up to 20 units, subject to system design
*200A is the manufacturer’s maximum discharge rating, not the normal operating setting. Configure routine charging and discharging at no more than 157A, subject to the written warranty and installer’s limits. Heater-assisted charging below 0°C requires prewarming, charging power and normal inverter communication.
View manufacturer datasheet ↗Dimensions, handling & location
- Width × height × depth
- 525 × 720 × 245mm
- Weight
- Approx. 117kg
- Enclosure
- IP65
The IP65 rating does not remove the manufacturer’s installation-location, temperature, clearance or condensation requirements. Professional handling and installation are required.
Delivery, collection & pre-orders
Delivery options are shown at checkout. Free warehouse collection is available after stock arrives. For pre-orders, full payment is taken at checkout; stock is expected on 10 November 2026. Dispatch and collection arrangements follow arrival.
10-year warranty & 8,000 warranted cycles
The SolarBoss supplied configuration includes a 10-year warranty and 8,000 warranted cycles, subject to the applicable written warranty terms, retained-capacity limits and operating conditions. Ask SolarBoss for the full written terms before purchase. Electrical installation and commissioning are additional and must be completed by an appropriately qualified installer. Confirm your inverter model and firmware with SolarBoss before ordering.
WATCH THE SOLARBOSS REEL
The €600 battery grant explained
You can apply with or without solar panels. Our “grant loophole” reel explains the difference, including when a BER is needed.
For eligible home battery installations of 5kWh or more. Receive SEAI approval before installation and use an SEAI registered Solar PV Contractor. A post-works BER is required where solar PV is present. Other scheme conditions apply.
Check the SEAI grant conditions (opens in a new tab)Loads Facebook’s video player when selected. Facebook may use cookies.
Watch on Facebook (opens in a new tab) ↗READY FOR YOUR NEXT ENERGY UPGRADE?
Make room for more stored energy.
Easyway UNIV-16kWh(WP) · 16.08kWh · €2,029.50€1,650.00 incl. VAT ex. VAT