EASYWAY HOME ENERGY STORAGE

Easyway
16.08kWh battery.

UNIV-16kWh(WP) · LiFePO4 home storage

High-capacity storage for your home energy system, with an IP65 enclosure, integrated heating plates and built-in aerosol fire suppression.

10-yearwarranty
8,000warranted cycles

Subject to the written warranty terms and operating conditions. View warranty guidance ↓

ONE-TIME PREORDER OFFER

Regular price€2,275.50€1,850.00 incl. VAT ex. VAT
SAVE €200 + VAT
€2,029.50€1,650.00 incl. VAT ex. VAT
Limited preorder allocation at this priceFirst come, first served.
The clock is ticking
--Days
--Hours
--Minutes
--Seconds

Price returns to €1,850 + VAT on 10 November 2026.

Offer ends at 00:00 Irish time on 10 November.

Free warehouse collectionChoose collection at checkout, by arrangement after stock arrives.

Battery onlyInverter, electrical installation and commissioning are additional.

Pre-order · stock expected 10 November 2026

Full payment at checkout. Dispatch or collection follows arrival; the arrival date is an estimate.

€600 Grant Available For eligible home installations of 5kWh or more. Get SEAI approval before work starts. Check eligibility with SEAI (opens in a new tab). Will it work with my inverter?

Wi-Fi & app monitoring

Check your battery’s charge level and operating status from your phone. Wi-Fi connection and app setup are required.

Dust & water-jet protection

A dust-tight enclosure that resists water jets helps protect the battery from dirt and splashes. Your installer must follow the manual’s location requirements.

Integrated heating: −20°C to +55°C

Heating plates prewarm the cells before charging in freezing conditions. Operation down to −20°C requires compatible inverter communication and charging power.

Built-in fire suppression

An integrated aerosol fire-suppression unit is included. Correct protection and professional installation remain essential.

MANUFACTURER-LISTED COMPATIBILITY

Works with leading inverter brands.

Plus many more supported brandsSee the full manufacturer compatibility list

The brands shown are included in Easyway’s UNIV-16kWh(WP) compatibility matrix. Confirm your exact model, firmware and settings with SolarBoss before purchase. Check your inverter ↓

CONNECT WITH CONFIDENCE

Check your inverter.
Get the right match.

The battery communicates over CAN or RS485. Compatibility depends on your exact inverter model, firmware, battery protocol and installation setup.

Not sure? Triple-check with SolarBoss before you purchase. Send us your inverter model and a photo of its label so we can check the combination.

Download the manufacturer’s full inverter compatibility list (PDF) ↗

Solis: manufacturer-listedChoose your inverter ↓

Your inverter

Start with your inverter brand.

We’ll show the available compatibility guidance. Your exact model still needs checking.

We’ll email you about this compatibility check. This checker provides guidance; it does not certify a complete installation.

DOCUMENTED PRODUCT EVIDENCE

Standards & supporting documents

Check the exact model, document scope and installation requirements with your installer.

BATTERY SAFETY

IEC 62619:2022

SGS IECEE CB certificate BE-57990, including UNIV-16kWh(WP).

View document ↗
ELECTROMAGNETIC COMPATIBILITY

EMC documentation

SGS SHCR260400078201AEC: EN IEC 61000-6-1:2019 and EN IEC 61000-6-3:2021.

View document ↗
MANUFACTURER DECLARATION

EU Declaration of Conformity

Manufacturer declaration covering EMC and RoHS. Check its stated model and scope.

View document ↗
TRANSPORT TEST REPORT

UN 38.3

Lithium-battery transport test report 1811C60156312701. This is transport evidence, not inverter compatibility approval.

View document ↗
SAFETY DATA

Safety data sheet

SDS / MSDS 1811C60156312704 provides handling and safety information. A safety data sheet is not a product certificate.

View document ↗

THE DETAILS THAT MATTER

Built for your
energy setup.

Compact floor-standing storage with LiFePO4 chemistry and CAN / RS485 communication. Plan access, handling and clearances with your installer.

Read the manufacturer’s manual ↗
Battery specifications
Nominal / usable energy
16.08 / 15.11kWh
Chemistry / nominal voltage
LiFePO4 / 51.2V
Battery capacity
314Ah
Operating voltage
44.8–57.6V
Recommended charge / discharge current
157A / 157A
Maximum charge current
157A
Maximum discharge current
200A (manufacturer rating)*
Charging with integrated heating
−20°C to +55°C; cells prewarm before charging below 0°C
Charging without heating
0°C to +55°C
Discharge temperature
−20°C to +55°C
Communications
CAN / RS485
Parallel expansion
Up to 20 units, subject to system design

*200A is the manufacturer’s maximum discharge rating, not the normal operating setting. Configure routine charging and discharging at no more than 157A, subject to the written warranty and installer’s limits. Heater-assisted charging below 0°C requires prewarming, charging power and normal inverter communication.

View manufacturer datasheet ↗
Dimensions, handling & location
Width × height × depth
525 × 720 × 245mm
Weight
Approx. 117kg
Enclosure
IP65

The IP65 rating does not remove the manufacturer’s installation-location, temperature, clearance or condensation requirements. Professional handling and installation are required.

Delivery, collection & pre-orders

Delivery options are shown at checkout. Free warehouse collection is available after stock arrives. For pre-orders, full payment is taken at checkout; stock is expected on 10 November 2026. Dispatch and collection arrangements follow arrival.

10-year warranty & 8,000 warranted cycles

The SolarBoss supplied configuration includes a 10-year warranty and 8,000 warranted cycles, subject to the applicable written warranty terms, retained-capacity limits and operating conditions. Ask SolarBoss for the full written terms before purchase. Electrical installation and commissioning are additional and must be completed by an appropriately qualified installer. Confirm your inverter model and firmware with SolarBoss before ordering.

WATCH THE SOLARBOSS REEL

The €600 battery grant explained

You can apply with or without solar panels. Our “grant loophole” reel explains the difference, including when a BER is needed.

For eligible home battery installations of 5kWh or more. Receive SEAI approval before installation and use an SEAI registered Solar PV Contractor. A post-works BER is required where solar PV is present. Other scheme conditions apply.

Check the SEAI grant conditions (opens in a new tab)

Loads Facebook’s video player when selected. Facebook may use cookies.

Watch on Facebook (opens in a new tab) ↗

READY FOR YOUR NEXT ENERGY UPGRADE?

Make room for more stored energy.

Easyway UNIV-16kWh(WP) · 16.08kWh · €2,029.50€1,650.00 incl. VAT ex. VAT

View battery specifications ↓