gf-slot:08 RSS

Brand Guide, gf-date:2026-07-22, gf-slot:08, gf:solis-datalogger-lights, Guide Factory, Solis -

What the PWR, COM and NET Lights Mean on a Solis Datalogger

What the PWR, COM and NET Lights Mean on a Solis Datalogger

The three labelled lights describe separate parts of the monitoring path. PWR is power, COM is logger-to-inverter communication, and NET is the connection to the Solis server. Reading them separately avoids assuming an inverter fault. Scope and safety This guide is for the S2-WL-ST, S3-WiFi-ST, S4-WiFi-ST and S5-WiFi-ST models covered by Solis's current support article, including USB and four-pin versions. Indicator layouts and behaviour on older DLS-W, GPRS, LAN-only or other logger families may differ. Observe the label and lights only. Do not remove, rotate or reseat an installed logger, open the inverter or touch wiring. Solis says an installed...

Read more

Brand Guide, Dyness, gf-date:2026-07-21, gf-slot:08, gf:dyness-dl5pro-alm-light, Guide Factory -

Dyness DL5.0C Pro Red ALM Light or Buzzer: What It Means and What to Do

Dyness DL5.0C Pro Red ALM Light or Buzzer: What It Means and What to Do

Scope: This guide is for the Dyness DL5.0C Pro low-voltage battery. It is not a guide for the earlier DL5.0C or another Dyness model. It covers visible indicators and evidence a homeowner can safely collect. Do not remove covers, test battery voltage, change DIP switches, disconnect cables, alter inverter settings or update firmware. The direct answer On a Dyness DL5.0C Pro, a flashing red ALM light indicates an alarm, while a steady red light indicates that the battery is in a protection state. The buzzer can accompany some protection events, including over-current or low-voltage conditions. That does not identify the...

Read more

Tags